Slag remover is used to remove impurities in molten iron and steel in casting. The specifications of slag remover mainly include 18-30 mesh, 30-50 mesh and 50-80 mesh. The slag remover is made of high quality perlite sand.

Fireclay

1. Slag removal and slag blocking: high efficiency slag remover can be used in ladle, tundish and electric furnace. After being evenly spread on the surface of molten liquid by manual or spray gun, the slag shell which is easy to separate from the metal solution can be quickly gathered with a little stirring, and the pure solution can be obtained by scraping off the slag shell, so as to avoid slag inclusion in the casting and improve the quality. And no explosion, no splash, no sticking package, no hanging wall. If it is necessary to block the slag, the slag accumulating agent can be added at the ladle or furnace mouth after slag removal and before casting to form a strip-shaped floating dam, which can stick and block sporadic molten slag, save manual slag blocking, reduce labor intensity and improve production efficiency.

2. Thermal insulation cover: high efficiency slag remover has low thermal conductivity and good insulation layer on the surface of molten metal can reduce the heat loss of solution. It is an excellent heat preservation and covering agent for tundish or metal solution which needs to be stored for a long time.

3. Environmental protection: high efficiency slag remover has no penetration to molten metal and does not affect its chemical composition and casting mechanical properties. No smoke, dust and harmful gas pollution, can purify the environment, civilized production.

4. Dosage: generally, the dosage of high-efficiency slag polymerizing agent is 1-3kg / T metal solution, which can be increased or decreased according to the size of molten liquid area, temperature and impurity content of molten metal.

Anyang dingyang metallurgical refractory materials Co., Ltd. was founded in 1992, located between the ancient capital of Anyang Yin Ruins and the hometown of Hongqiqu. The company covers an area of 16000 square meters, of which the construction area is 14000 square meters, with a total investment of 18 million yuan, including 10 million yuan of fixed assets, more than 150 employees, including more than 30 professional and technical personnel, and 4 complete production lines. The annual design production capacity is 20000 tons of all kinds of shaped series bricks, with a total investment of 18 million yuan Series: 280000 pieces, 60000 tons of various unshaped refractory materials. For more information: http://www.dyyjnc.com

Related search: imported slag collector refractory mud